Carbon tape required for label printing of the hot

Carbon tape required for label printing of different media

printing media refers to the materials that can be printed by the label printer. From the shape of the media, it mainly includes ribbon, card and label, and from the material, it mainly includes paper, synthetic materials and cloth. It is mainly the material of media that decides which carbon tape to use. The following are introduced respectively:

paper is divided into high gloss, semi high gloss and matte according to the surface risk avoiding gloss

* highlights: Mirror copperplate, glossy paper, etc

* semi gloss: coated paper

* matte paper: offset paper

* special paper includes aluminum foil paper, fluorescent paper, heat sensitive/heat transfer paper. Passive construction technology can reduce active energy input and reduce construction cost

in general, resin reinforced wax based carbon tape or mixed based carbon tape (R310 and R, which are more and more widely used 410) is used as the medium for printing high gloss paper, especially the mirror coated paper. Although it is called copperplate, its surface is a layer of light film of synthetic material, which should be treated as synthetic material, and r410 carbon tape should be used. The types of carbon tapes available for semi gloss paper are resin reinforced wax based and general wax based carbon tapes (R31 will be poured into the room into water 0 and r313). The matte type can only be printed with r313

synthetic materials are divided into:

* pet (polyester)

* PVC (polyvinyl chloride)

* BOPP (polypropylene)

* PE (polyethylene)

* PS (polypropylene)

* polyimide (poly milled vinyl amine)

* metallized pet mainly includes laser rainbow film, drawing film, gold (high gloss, matte) and silver (high gloss, matte)

compared with paper materials, these materials have greater strength and beauty, wider application range to the environment, and higher requirements for carbon belts. They mainly use mixed base and resin based carbon belts. The specific carbon belt depends on the user's requirements and use environment. If only friction resistance is required, only r410 can be used. If there are other requirements, such as corrosion resistance and high temperature resistance, r510 should be used, However, only pet (180 ℃) and polyimide (300 ℃) can be used for labels at this time

the above is only the general situation, but there are many kinds of materials with great differences between them. In order to obtain satisfactory printing effect, we should test many times according to their respective conditions in order to find a suitable carbon tape